微型热驱动热声热机热端换热器的优化设计

该文基于热声环境,采用厘米级扁管和deltaE数值计算对微型热声换热器进行了优化设计。     

CO-laser photoacoustic detection of phosgene (COCl2)

Detection of COCl₂, a highly toxic gas in chemical industry, using laser photoacoustic spectroscopy is presented. The spectrophone system used has a broad band LN₂ cooled CW CO laser as a source of radiation, which operates from 4.8–8.4 um in the mid-infrared. Using an extracavity open longitudinal resonant cell, absorption signals to about 30 CO laser lines in the 5.45 um region could be observed. detection sensitivity has been estimated to be ppb order.This work has been supported by the NSFC     

Lattice Boltzmann Model for the Incompressible Navier–Stokes Equation

In this paper a lattice Boltzmann (LB) model to simulate incompressible flow is developed. The main idea is to explicitly eliminate the terms of o(M ²), where M is the Mach number, due to the density fluctuation in the existing LB models. In the proposed incompressible LB model, the pressure p instead of the mass density ρ is the independent dynamic variable. The incompressible Navier–Stokes equations are derived from the incompressible LB model via Chapman–Enskog procedure. Numerical results of simulations of the plane Poiseuille flow driven either by pressure gradient or a fixed velocity profile at entrance as well as of the 2D Womersley flow are presented. The numerical results are found to be in excellent agreement with theory.     

Combinatorial computational chemistry approach of tight-binding quantum chemical molecular dynamics method to the design of the automotive catalysts

Recently, we have developed a new tight-binding quantum chemical molecular dynamics program “Colors” for combinatorial computational chemistry approach. This methodology is based on our original tight-binding approximation and realized over 5000 times acceleration compared to the conventional first-principles molecular dynamics method. In the present study, we applied our new program to the simulations on various realistic large-scale models of the automotive three-way catalysts, ultrafine Pt particle/CeO₂(111) support. Significant electron transfer from the Pt particle to the CeO₂(111) surface was observed and it was found to strongly depend on the size of the Pt particle. Furthermore, our simulation results suggest that the reduction of the Ce atom due to the electron transfer from the Pt particle to the CeO₂ surface is a main reason for the strong interaction of the Pt particle and CeO₂(111) support.     

适用于雷达系统的高温超导窄带滤波器

对雷达系统,通过在接收前端安置高Q、窄带、高带外抑制的滤波器,可以有效减少信号间的干扰,由此可见高性能的滤波器对于雷达系统来说,具有重要作用.与常规滤波器相比,高温超导滤波器具有带边陡峭、插入损耗小、带外抑制高、可以设计极窄带等特点.在本文中,我们设计加工了一种高性能的12阶切比雪夫(Chebyshev)高温超导带通滤波器,其中心频率为1341兆赫兹、带宽为5.035兆赫兹,可用于雷达系统.在滤波器设计中,我们用Sonnet软件对滤波器进行了仿真计算.最后滤波器在以氧化镁为衬底的双面超导薄膜上制作,衬底直径为2英寸、厚度为0.5毫米.测试结果表明,该滤波器符合设计要求,具有很好的选择性和带外抑制.     

微波频率下Ba0.5Sr0.5TiO3薄膜的介电特性随温度及外加偏压变化的检测

提出了一种新的结构来表征钛酸锶钡薄膜在微波频率下的介电特性,即在沉积有钛酸锶钡薄膜的氧化镁基片上制作了共面带阻滤波器.借助于共面带阻滤波器的谐振频率和Q值,通过比较其测量值与仿真值,可以得出钛酸锶钡薄膜的介电常数和介电损耗.在变温测试过程中,注意到金导电层的电导率对带阻滤波器的谐振频率和Q值有较大的影响.为了准确地得到钛酸锶钡薄膜的介电特性,仔细分析了金导电层对带阻滤波器频率响应曲线的影响,并在比较求值过程中消除了这一影响.     

EAST装置等离子体放电位形快速识别研究

为了适应超导托卡马克装置EAST位形控制运行模式的需要，研究了等离子体放电位形快速识别算法，给出了等离子体放电位形重建的模拟计算结果，并与美国GA平衡反演程序EFIT计算的平衡结果进行了详细的误差对比分析.结果表明，通过外部磁测量和合适的电流剖面模型，并结合实时平衡重建算法可以快速地对EAST等离子体放电位形进行识别. 关键词： 托卡马克 等离子体 平衡重建 数值模拟     

正负系数中立型差分方程的正解的存在性

In this paper the sufficient conditions for the existence of positive solutions of the neutral difference equations with positive and negative coefficients are established. The results improve some known conclusions in the literature     

C~k连续的保形分段2k次多项式插值

1．引言在每个子区间上，通过插入至多一个内结点，Brodlie和Butt［1］给出了分段三次多项式保形插值算法，Randal［2］等讨论了分段五次多项式插值，作者［31讨论了一般分段奇次多项式的保形插值，并且给1了内结点的位置范围公式．这种插值方法完全解决了一般的分段奇次多项式的保形插值问题．关于分段偶次多项式的保形插值，大多数文献只讨论分段二次保形插值，这里要特别指出的是Shumake［4j导出了二次样条保凸的充要条件，并且给出了一个二次样条保形插值的方法．在每一个子区间上至多插入一个内结点，则一个二次插值样条就可得到．作…     

Reversible addition–fragmentation transfer (RAFT) copolymerization of methyl methacrylate and styrene in miniemulsion

In the reversible addition–fragmentation transfer (RAFT) copolymerization of two monomers, even with the simple terminal model, there are two kinds of macroradical and two kinds of polymeric RAFT agent with different R groups. Because the structure of the R group could exert a significant influence on the RAFT process, RAFT copolymerization may behave differently from RAFT homopolymerization. The RAFT copolymerization of methyl methacrylate (MMA) and styrene (St) in miniemulsion was investigated. The performance of the RAFT copolymerization of MMA/St in miniemulsion was found to be dependent on the feed monomer compositions. When St is dominant in the feed monomer composition, RAFT copolymerization is well controlled in the whole range of monomer conversion. However, when MMA is dominant, RAFT copolymerization may be, in some cases, out of control in the late stage of copolymerization, and characterized by a fast increase in the polydispersity index (PDI). The RAFT process was found to have little influence on composition evolution during copolymerization. The synthesis of the well‐defined gradient copolymers and poly[St‐b‐(St‐co‐MMA)] block copolymer by RAFT miniemulsion copolymerization was also demonstrated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6248–6258, 2004